Plug N Play Oil Separator Catch Can Separator (fits 07-21 Tundra 5.7 08-22 Sequoia 5.7) UPR – Catch Can-Satin Silver

UPR’s new Catch Can kit for your Toyota Tundra or Sequoia 5.7L is the perfect fit for your engine bay. With its extremely efficient compact design and incredible good looks, We went the extra mile to ensure you get the best quality components. This kit is 100% Modular and can be fully disassembled or emptied and cleaned in seconds. It utilizes UPR Braided Hose and Billet Hose Ends to give you the Strongest and Best Performing Setup for UPR’s entry level Catch Can. No cheap stock lines here that have been cut and spliced on! Featuring UPR Plug N Play Catch Can Fittings, you can empty the can without removing the intake cover or catch can lines from your engine. (Just simply unscrew the catch can bottom in seconds to empty it.) We have hundreds of hours testing our Multi-Stage Multi-Chamber Oil Separator’s ensuring the results will exceed your expectations. We even have the largest oil capacity for a compact highly efficient internal diffuser system. 4 ounces will give you the needed oil capacity to be sure the catch can does not overfill. This new internal diffuser design provides exceptional Oil Control with it’s ability to coalesce and condense better than every other competitor on the market as this is engineered properly. It cannot be compared or confused with units that have side by inlets and outlets with ineffective flimsy honeycomb filters or air compressor filters to keep the cost down and never take into account how critical the separation process is. UPR’s diffuser technology has consistently to capture and filter the most oil vapor and trash from getting into your air intake tract. This is the most critical feature of any catch can system. Every UPR Catch Can is a designed and tested USA product. UPR is the largest aftermarket catch can manufacturer in the country. Continually improving our designs to stay ahead of the competition and give you the cutting edge technology of tomorrow today. We are so confident we offer an unconditional warranty on our products to let you know you can always count on UPRproducts. We do not use plastic catch can fittings like the competition to ensure you will never have any cracks or failures that cheap plastic fittings suffer from.

Installs in 10-20 minutes or less.
This UPR Pro Series catch can kit is shipped ready to install even if no upgrades are selected. Upgrades are available to allow you to tailor the kit to fit your needs.

Optional Parts:

Replacement O-Rings:
Spare O-rings for the catch can cup. If the O-ring is lost, torn or if it’s just time to replace it due to wear it’s a good idea to have a couple of spares in the glove box.

THIS PART DOES NOT CARRY AN CARB EO NUMBER, AND THEREFORE IS FOR RACING / OFF ROAD USE ONLY. NOT FOR SALE OR USE IN CALIFORNIA DUE TO CARB/EMISSIONS. ALL CALIFORNIA ORDERS WILL BE CANCELLED AND REFUNDED

Product Features:

Show Quality Finish
Prevents Oil from Entering Intake
Exclusive Multi Stage Design Traps Oil
Innovative Diffuser Tube and Chamber 4oz Capacity Can measures 2.25″ x 3.5″
High Quality CNC Machined Billet Aluminum
Plug N Play fittings at Catch Can connections
Oil Resistant Continental Braided Hose included Improves Fuel Economy, Throttle Response & Performance High Quality Billet Aluminum Catch Can Fittings
Available in Satin Silver or Black Anodized Finish – Select Finish Above

Fits These Vehicles:

2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 Toyota Tundra 5.7 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 Toyota Sequoia 5.7

Made in the USA!

Question & Answer

Q: What is the problem with your PCV system?
A: The Positive Crankcase Ventilation (PCV) system is used to recycle the gases that leak or “blow-by” the your engines piston rings and create a positive pressure in the crankcase. By venting these gases along with oil mist/vapor from the crankcase and route it back into the intake manifold so it can be burned off.
This is a poor fix from automobile manufacturers, because over time the excess oil vapor collects along the inside of the intake tract and forms a “sludge”. This leads to a variety of issues including carbon build up, retarded timing, detonation, power loss and even engine failure.
UPR s fix for the PCV system used on many engines for reducing toxic gases from being released into the atmosphere and eliminating positive crankcase pressure / Blow-By.

Q: What does a UPR Catch Can do?
A: UPR s Billet Catch Can / oil-air separator will condense and collect the oil vapor before it has any chance to reach the intake tract. As the gas and oil vapor enters UPR s can they pass through a Chambered filtering system that cools the oil vapor and gives it something to adhere to.
Then the oil forms into droplets and collect in the bottom of the UPR Catch Can so that they can later be drained. This is where the additional Chambered filtering system comes into play allowing only the clean air to pass through so it can eliminate unwanted blow by.
All engines have blow by otherwise there would be no need for a PCV system on your engine. PCV = Positive Crankcase Valve, which eliminates Positive Crankcase Pressure. UPR s Catch Can has become one of the most widely used and recommended cures for just about every application.